MikroTik LHG-5axD-US 5GHz Wi-Fi 6 Outdoor CPE
5.0Editor score
Wi-Fi 6 performance
High-gain directional antenna
Gigabit Ethernet with PoE
In this guide
Finding the right 5G Cpe Antenna for Fixed Wireless Access is crucial for maximizing your home or business internet connection. These devices enhance signal strength and stability across diverse cellular bands.
We evaluated ten leading models based on their gain, MIMO capabilities, weather resistance, and ease of installation. Our analysis focuses on real-world performance metrics for fixed wireless setups.
Each pick highlights specific strengths for different user needs ranging from budget friendly options to premium systems. Remember that pricing and availability can fluctuate frequently on retailer sites.
Top 3 Picks for Best 5G Cpe Antenna for Fixed Wireless Access
Uhura™ 4-Port 5G FWA Omnidirectional Antenna System
4.9Editor score
4×4 MIMO support
Wideband frequency coverage
Zero-aim omnidirectional design
Peplink Cellular and WiFi Antenna Mobility 42G
4.6Editor score
Built for 5G connectivity
Ultra-wide bandwidth range
Robust IP68 rated design
Top 10 Best 5G Cpe Antenna for Fixed Wireless Access in 2026 Compared
The following table provides a side-by-side comparison of all ten selected products. It highlights key specifications and features to help you quickly identify the best fit for your network requirements.
ProductsSpecificationsEditor scorePrice
Best Budget
TP-Link CPE710
23 dBi directional antenna
256 QAM support
IP65 weatherproof enclosure
Pharos Control management
4.3Editor score
Editor's Choice
Uhura™ 4-Port 5G FWA Omnidirectional Antenna System
4×4 MIMO operation
617MHz to 6000MHz band
Zero-aim design
Polarization diversity
4.9Editor score
Best Premium
Proxicast 4G / LTE / 5G Cross-Polarized (MIMO) 7-10 dBi High-Gain Fixed-Mount Outdoor Directional Panel Antenna
7-10 dBi gain
Dual polarized design
75 degree beamwidth
Cross-polarized MIMO
4.2Editor score
MikroTik LHG XL 5 ax
27 dBi high-gain
Wi-Fi 6 performance
Up to 30 km range
Passive PoE support
5.0Editor score
MikroTik SXTsq Lite5 16dBi 5GHz Dual Chain Integrated CPE/Backbone
16dBi integrated antenna
Dual chain support
Compact lightweight design
Outdoor wireless device
3.8Editor score
Peplink Cellular and WiFi Antenna Mobility 42G
4×4 MIMO antenna
600-6000MHz range
IP68 rated housing
GPS receiver included
4.6Editor score
Ubiquiti Networks 2 PACK NBE-5AC-GEN2 NanoBeam ac Gen2 airMAX ac CPE
19 dBi gain
450+ Mbps throughput
Dual linear polarization
Wide coverage options
4.4Editor score
Waveform QuadMini: Low-Profile Omni 4×4 MIMO Antenna
4×4 MIMO support
Ultra-thin profile
No aiming required
Complete mounting kit
4.1Editor score
Poynting X-Polarised, Omni-Directional, 4X4 MIMO 5G Antenna
4×4 MIMO performance
7 dBi peak gain
Omni-directional pattern
IP65 weather resistant
MikroTik LHG-5axD-US 5GHz Wi-Fi 6 Outdoor CPE
24.5 dBi antenna
Wi-Fi 6 technology
Long-range wireless links
RouterOS features
5.0Editor score
1. Uhura™ 4-Port 5G FWA Omnidirectional Antenna System – Best Overall Signal Stability
Uhura™ 4-Port 5G FWA Omnidirectional Antenna System
4×4 MIMO operation
Wideband frequency coverage
Zero-aim omnidirectional design
Polarization diversity support
This antenna system stands out for its ability to support full 4×4 MIMO operation which is essential for maximizing modern 5G speeds. Its rating reflects user satisfaction with consistent performance in varied environments.
Pros
- Supports multiple simultaneous data streams
- Captures signals from all directions
- Blends into modern interiors
- Includes comprehensive mounting kit
- High efficiency across major bands
Cons
- Premium pricing tier
- Requires proper cable routing
We may earn a commission when you buy through this link, at no additional cost to you.
The wideband coverage from 617MHz to 6000MHz ensures compatibility with most carrier bands including LTE and 5G FR1. The zero-aim design simplifies installation significantly compared to directional models.
While it requires a bit more planning for cable routing due to its four ports the stability gains are worth the effort. It avoids the need for professional installers which reduces overall setup costs.
Anyone seeking a reliable upgrade for their existing 5G gateway should consider this model. It offers a balanced combination of performance and ease of use for fixed wireless access.
Enhanced MIMO Capabilities
Four independent antenna ports connect directly to your gateway for improved throughput and reliability.
Universal Compatibility
Works with AT&T, Verizon, and T-Mobile gateways supporting most LTE and 5G bands.
We may earn a commission when you buy through this link, at no additional cost to you.
2. MikroTik LHG-5axD-US – Best Budget Long Range Solution
MikroTik LHG-5axD-US 5GHz Wi-Fi 6 Outdoor CPE
Wi-Fi 6 performance
24.5 dBi gain
Gigabit Ethernet with PoE
Long-range wireless links
This device delivers exceptional performance for its price point with a high-gain directional antenna that reaches far distances. Users report high satisfaction due to its robust build and effective throughput.
Pros
- Extremely high signal gain
- Wi-Fi 6 throughput support
- Includes passive PoE input
- Weather-resistant outdoor design
- Advanced RouterOS features
Cons
- Directional pointing required
- Setup may need technical knowledge
We may earn a commission when you buy through this link, at no additional cost to you.
The integrated 24.5 dBi dish antenna provides stable point-to-point links which are ideal for connecting remote buildings or extending range significantly. Wi-Fi 6 technology ensures better efficiency in high-interference areas.
The need for precise aiming is a trade-off but it is necessary for achieving the advertised range. Most users find the included tools and guides sufficient for basic alignment tasks.
It is a perfect choice for those needing a budget friendly yet powerful link for fixed wireless access. The included advanced routing features add value beyond simple signal transmission.
Advanced Wi-Fi 6 Tech
Powered by 802.11ax technology for improved throughput and better performance in high-interference environments.
Simplified Installation
Equipped with Gigabit Ethernet port and Passive PoE input enabling fast data transfer and simplified installation.
We may earn a commission when you buy through this link, at no additional cost to you.
3. Peplink Cellular and WiFi Antenna Mobility 42G – Best Premium Performance
Peplink Cellular and WiFi Antenna Mobility 42G
Built for 5G connectivity
Ultra-wide bandwidth range
Robust IP68 rated design
Includes GPS receiver
This system is built specifically for high performance 5G applications with a focus on reliability in mobile and fixed settings. The rating highlights its capability to handle various connectivity challenges effectively.
Pros
- Supports 4×4 MIMO mobile
- Wide frequency range 600-6000MHz
- Dual band Wi-Fi included
- Extremely durable housing
- Simple panel installation
Cons
- Higher price point
- Slightly bulky for small mounts
We may earn a commission when you buy through this link, at no additional cost to you.
It features a wide frequency range supporting both LTE and 5G connectivity along with separate Wi-Fi antennas for local coverage. The IP68 rated housing ensures it withstands harsh environmental conditions without degradation.
The higher cost reflects the premium build quality and comprehensive feature set including the GPS receiver. For users requiring maximum stability and durability this extra investment is often justified.
It is recommended for users who need a robust solution for critical internet connections in varying locations. Its design prioritizes consistent signal capture and long-term durability.
Comprehensive Frequency Support
Wide frequency range from 600 to 6000MHz supports both LTE and 5G connectivity seamlessly.
Durability Focus
IP68 rated low profile and durable housing in white ensures robust performance in any weather.
We may earn a commission when you buy through this link, at no additional cost to you.
4. TP-Link CPE710 – Best Mid Range Outdoor Option
TP-Link CPE710
23 dBi directional antenna
256 QAM support
IP65 weatherproof enclosure
Pharos Control management
This device is designed for long-distance wireless networking with a strong focus on stability and speed. Users appreciate its ability to improve signal strength significantly over standard indoor antennas.
Pros
- Boosts speeds up to 867 Mbps
- Excellent beam directivity
- Snap-lock assembly simplicity
- 15kV ESD protection
- Centralized management software
Cons
- Requires precise mounting
- Limited to 5GHz band
We may earn a commission when you buy through this link, at no additional cost to you.
The 23 dBi directional antenna ensures excellent beam directivity which reduces noise and improves latency. The IP65 weatherproof enclosure protects it from rain and dust making it suitable for outdoor mounting.
Assembly is simplified by snap-lock parts and the pole mount kit offers flexible installation options. However, precise alignment is necessary to maximize its directional benefits effectively.
It is a solid choice for users needing a reliable outdoor bridge between two locations. The included management software adds a layer of control for more advanced setups.
Improved Connection Speed
23 dBi Directional 2 x 2 MIMO Antenna boosts overall speeds up to 867 Mbps efficiently.
Weather Protection
Durable IP65 weatherproof enclosure along with lightning protection ensures all-weather suitability.
We may earn a commission when you buy through this link, at no additional cost to you.
5. Proxicast Directional Panel Antenna – Best Flexible Mounting Option
Proxicast 4G / LTE / 5G Cross-Polarized (MIMO) 7-10 dBi High-Gain Fixed-Mount Outdoor Directional Panel Antenna
7-10 dBi gain
Dual polarized design
75 degree beamwidth
Cross-polarized MIMO
This antenna is designed to improve signal strength and speed for various cellular bands. It is compatible with a wide range of routers and gateways which adds to its utility.
Pros
- Improves signal strength significantly
- Compatible with many gateways
- Supports T-Mobile 5G Band 71
- Creates 4×4 MIMO with panels
- Works with major carriers
Cons
- Requires coax extension cables
- Directional aiming necessary
We may earn a commission when you buy through this link, at no additional cost to you.
The dual polarized design increases signal strength and data speeds which is critical for remote sites. It specifically supports T-Mobile 5G Band 71 and other major 5G frequencies effectively.
To create a full 4×4 MIMO setup you can use two panels mounted at different angles. The package includes female N connectors but you will need separate extension cables for installation.
It is a great choice for those who need to boost existing cellular signals without replacing hardware. The directional design helps isolate and strengthen the target tower signal.
High Gain Performance
Dual Polarized 75 Degree Directional Beamwidth MIMO Design Increases Signal Strength effectively.
Wide Compatibility
Compatible with MIMO Capable Routers from Cisco, Netgear, and many others.
We may earn a commission when you buy through this link, at no additional cost to you.
6. MikroTik LHG XL 5 ax – Best Ultra Long Range Performance
MikroTik LHG XL 5 ax
27 dBi high-gain
Wi-Fi 6 performance
Up to 30 km range
Passive PoE support
This device is engineered for extreme range links with a massive 27 dBi antenna designed for remote deployments. The perfect rating indicates high reliability in challenging rural environments.
Pros
- Extreme long-range wireless links
- High throughput 1200 Mbps
- Weather-resistant enclosure
- Integrated grid antenna
- Low power consumption
Cons
- Specialized technical setup
- Point-to-point specific use
We may earn a commission when you buy through this link, at no additional cost to you.
It supports Wi-Fi 6 performance with up to 1200 Mbps throughput which is impressive for such long distances. The weather-resistant enclosure ensures durability even in harsh outdoor conditions.
The passive PoE support simplifies power delivery which reduces installation complexity significantly. However, it is optimized for point-to-point links so careful planning is required.
It is ideal for providers or homeowners needing to bridge distances over ten kilometers reliably. The integrated grid antenna helps maintain stability against wind and interference.
Distance Capability
Extreme Long-Range Wireless capability up to 30 km for rural and remote deployments.
Efficient Operation
Passive PoE with only 5W usage allows for efficient deployments with low power consumption.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Ubiquiti NanoBeam ac Gen2 – Best Reliable Dual Pack System
Ubiquiti Networks 2 PACK NBE-5AC-GEN2 NanoBeam ac Gen2 airMAX ac CPE
19 dBi gain
450+ Mbps throughput
Dual linear polarization
Wide coverage options
This pack provides a complete solution for point-to-point links with incredible speed potential. The 19 dBi antenna delivers a focused signal that minimizes interference effectively.
Pros
- Incredible speed potential
- Reliable processor performance
- Strong focused signal
- Easy setup features
- Adjustable channel sizes
Cons
- Requires two units for full link
- May need firmware updates
We may earn a commission when you buy through this link, at no additional cost to you.
Powered by a reliable processor and memory configuration it ensures stable operation for consistent connectivity. The adjustable channel sizes allow you to optimize bandwidth for specific environments.
The dedicated Wi-Fi radio simplifies management and monitoring via intuitive software. It is a well-rounded product for those needing a durable and high-performance connection.
It is recommended for small businesses or homes needing a fixed wireless backhaul solution. The dual pack ensures both ends of the link are ready for deployment.
High Speed Throughput
Experience 450+ Mbps throughput ideal for demanding applications requiring a reliable high-speed connection.
Reliability
Powered by an Atheros MIPS 74Kc 720 MHz processor ensuring stable operation.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Waveform QuadMini – Best Compact Omni Solution
Waveform QuadMini: Low-Profile Omni 4×4 MIMO Antenna
4×4 MIMO support
Ultra-thin profile
No aiming required
Complete mounting kit
This antenna system is designed to be compact yet powerful with an ultra-thin profile. It supports 4×4 MIMO which can significantly improve data rates without complex aiming.
Pros
- Up to 5.2 dBi gain
- No aiming required
- Complete installation kit
- Multiple mounting options
- Expert support included
Cons
- MIMO isolation critical
- Signal conditions vary
We may earn a commission when you buy through this link, at no additional cost to you.
The omnidirectional design means you can enjoy a fast stable connection without fussing over orientation. It comes bundled with essential cables and boots for a complete installation.
Multiple mounting options allow you to attach it to windows poles or walls depending on your signal. The detailed manuals and expert support are helpful for first-time users.
It is a great choice for those wanting an easy upgrade without heavy industrial equipment. The kit ensures you have everything needed to get started quickly.
Ease of Installation
Bundled with one-of-a-kind Window Entry Cable and UltraFlex-Quad cables to get fast 5G data rates.
Design
Ultra-thin and lightweight profile significantly improving cell signal to routers with 4 antenna ports.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Poynting X-Polarised – Best Universal 5G Support
Poynting X-Polarised, Omni-Directional, 4X4 MIMO 5G Antenna
Ultra-wideband frequency range
4×4 MIMO performance
7 dBi peak gain
Omni-directional pattern
This antenna supports a massive frequency range covering legacy and future 5G technologies seamlessly. The four cross-polarised antennas enable improved data throughput and link reliability.
Pros
- Supports 410 to 6000 MHz
- Improved data throughput
- Consistent coverage across bands
- IP65-rated protection
- Pole and wall mount support
Cons
- Requires external SMA cables
- Gain varies by carrier
We may earn a commission when you buy through this link, at no additional cost to you.
Its omni-directional radiation pattern ensures consistent coverage across urban and suburban environments. The peak gain of 7 dBi offers extended coverage compared to previous versions.
The IP65-rated design protects against dust and water making it ideal for harsh outdoor use. It requires 5m coax cables which are included in the package.
It is suitable for users who need a versatile antenna that covers a broad spectrum. The durability and gain improvements make it a strong contender for fixed wireless access.
Wide Frequency Support
Supports 410 to 6000 MHz for compatibility with legacy and future 5G technologies.
Strong Gain
High Peak Gain of 7 dBi delivers extended coverage and stronger signals for Fixed Wireless Access.
We may earn a commission when you buy through this link, at no additional cost to you.
10. MikroTik SXTsq Lite5 – Best Compact Integrated Device
MikroTik SXTsq Lite5 16dBi 5GHz Dual Chain Integrated CPE/Backbone
16dBi integrated antenna
Dual chain support
Compact lightweight design
Outdoor wireless device
This device is a compact and lightweight outdoor wireless device with an integrated antenna. It is designed for simplicity and ease of deployment in small scale setups.
Pros
- Lightweight compact form factor
- Integrated antenna simplicity
- Outdoor wireless device
- Dual chain technology
- Easy to mount
Cons
- Lower gain than larger units
- Limited to 5GHz band
We may earn a commission when you buy through this link, at no additional cost to you.
The integrated antenna simplifies the installation process compared to units requiring separate components. Its dual chain support helps maintain reasonable data rates over moderate distances.
While it is not as powerful as larger units it offers a clean solution for basic links. The lightweight design makes it easy to mount on various surfaces without heavy brackets.
It is suitable for users with basic range needs who prefer an all-in-one device. The integrated design reduces potential points of failure during outdoor use.
Compact Design
The SXTsq Lite5 US Version is a compact and lightweight outdoor wireless device with an integrated antenna.
Dual Chain
16dBi 5GHz Dual Chain Integrated CPE/Backbone supports basic wireless networking needs.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best 5G Cpe Antenna for Fixed Wireless Access
Selecting the right antenna requires understanding your specific needs and the environment you will be deploying it in. Below are key factors to consider.
Gain and Range
The gain of an antenna measured in dBi determines how much signal it can amplify. Higher gain typically means better range but narrower focus. For long distances a directional antenna with high gain is ideal for point-to-point links.
Choose a model with sufficient gain to cover your distance without creating interference issues.
MIMO Capabilities
Multiple Input Multiple Output (MIMO) technology allows multiple data streams to be transmitted simultaneously. For 5G FWA look for 4×4 MIMO to maximize speed and reliability. This is critical for modern carriers.
Ensure your gateway supports the MIMO ports provided by the antenna.
Frequency Compatibility
Your antenna must support the specific frequencies used by your carrier. Most modern units cover 600MHz to 6000MHz. Verify that it includes sub-6 bands like Band 71 for rural areas.
Always check your carrier's band usage before purchasing to avoid compatibility issues.
Omnidirectional vs Directional
Directional antennas focus energy in one direction which provides higher gain for long links. Omnidirectional antennas capture signals from all directions which is better for areas with fluctuating tower locations.
Pick directional for fixed remote links and omnidirectional for general residential upgrades.
Weatherproofing
Outdoor antennas must withstand harsh conditions. Look for IP65 or higher ratings to ensure protection against rain and dust. This longevity prevents signal loss over time due to damage.
A higher weather rating ensures your investment lasts through winter storms.
Installation Complexity
Some models require professional alignment and specific cabling while others offer plug-and-play simplicity. Zero-aim designs are great for beginners but may offer slightly lower peak performance.
Consider your technical skill level when choosing between complex kits and simple mounts.
Connectors and Cables
Check the type of connectors like SMA or N-type to ensure they match your gateway. Long cable runs can degrade signal so opt for low-loss cables if needed for distance.
Verify all required cables are included or budget for quality extensions.
Bandwidth Support
Higher bandwidth support allows for faster data rates. Look for antennas that support wide bandwidths especially for 5G networks. This ensures you can take advantage of carrier speed upgrades.
Prioritize models that support the latest wideband technologies for future proofing.
How to Use and Care for Your 5G Cpe Antenna for Fixed Wireless Access
Begin by identifying the direction of the cell tower. For directional antennas use a signal strength app to align the device for maximum peak reading.
Securely mount the antenna using the provided hardware to prevent movement in high winds. Ensure all connections are weather sealed to avoid moisture damage.
Regularly check for cable damage or debris on the antenna surface. Clean with a dry cloth and avoid harsh chemicals that might strip weather coatings.
Frequently Asked Questions
Do I need a professional installer for these antennas?
While some models offer zero-aim designs, many directional units benefit from precise alignment for optimal performance. If you are comfortable with mounting tools you can install them yourself. However, professional help ensures the best signal capture.
Can I use this antenna with any 5G router?
You must check that your router has the correct external antenna ports and supports the frequency bands. Most modern gateways include these ports but verify the connector type matches the antenna.
What is the difference between 5G and LTE support?
5G support allows for faster speeds and lower latency on modern networks. Many antennas are backwards compatible with LTE so they work with older towers but prioritize 5G bands for better results.
How do I improve signal strength further?
Positioning the antenna higher and clear of obstacles is the best way to improve signal. Also ensure your gateway is updated to use the latest firmware features for stability.
Are there any legal restrictions on antenna height?
Check your local zoning laws and HOA rules regarding outdoor antenna height. Some areas have limits on structures attached to your home or roof.
How long do these antennas typically last?
With proper weatherproofing and installation a quality antenna can last many years. Regular maintenance helps ensure consistent performance over time.
Final Thoughts on Choosing the Best 5G Cpe Antenna for Fixed Wireless Access
We reviewed ten top models ranging from budget options to high-end systems for various needs. The Uhura™ Omni system offers broad performance while the MikroTik options provide exceptional range.
Prioritize compatibility and weatherproofing to ensure your setup remains reliable through seasons. MIMO support is essential for maximizing speed in 5G networks.
Always check current availability and reviews before purchasing to ensure you get the best fit for your specific gateway and location.